BOOK ONLINE - CHOOSE YOUR MAKE/MODEL TO VIEW AVAILABLE OPTIONS
BOOK ONLINE - CHOOSE YOUR MAKE/MODEL TO VIEW AVAILABLE OPTIONS
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns
Add description, images, menus and links to your mega menu
A column with no settings can be used as a spacer
Link to your collections, sales and even external links
Add up to five columns




GEARBOX CODE DL382 | DL382 -7Q (0CJ/0CK/0CL/0DN)
7 Speed S-Tronic Transmission as fitted to the following Audi 7 Speed S-Tronic Quattro and Front Wheel Drive Models with longitudinally mounted engines fitted;
Audi Q5 2.0 TDI Quattro 177PS S-Tronic [2016-present]
Your DSG / S-tronic Quattro gearbox is a very sophisticated piece of engineering that needs to be looked after with regular oil changes. The smooth 2-clutch system is computer controlled with very fine engineering tolerances. If the gearbox oil is dirty, it will damage other parts and affect performance.
Dirty oil can overheat the gearbox or cause the clutches to burn out. This will lead to poor gear selection, loss of drive and transmission failure.
The DL382 transmission is used exclusively in Audi vehicles with longitudinal (or inline) transmissions, meaning the engine/transmission power-train travel along the length of the vehicle rather than side to side. It is a seven speed transmission that makes use of a wet clutch assembly.
We would require the vehicle for 5 hours to performed this service to allow the vehicle to cool down as the gearbox must be stone cold when we perform the oil change.
Your S-Tronic gearbox clutch oil on this transmission should be replaced 35,000 miles for first change; 40,000 miles for all subsequent changes.
During an oil check, we check the gearbox and look for any leaks. We drain the gearbox completely before filling it with high-quality gearbox oil that meets manufacturer standards.
IMPORTANT: The gearbox has to be completely cold when performing this procedure. We would require the vehicle to be dropped off at least 5 hours before we begin the procedure to allow the gearbox to cool. You're more than welcome to drop the vehicle off with us the day before if you wish.